Signs Your Chimney Is Failing

That said, chimney components can fail, and they require proper maintenance to ensure that your chimney remains safe and free from leaks. That’s why it’s crucial to have regular inspections and maintenance performed on your roof, and it’s why we recommend that homeowners understand some of the signs that their chimney isn’t up to snuff. If you’re concerned about your chimney, don’t start a fire just yet. Be sure to have a licensed chimney expert inspect your chimney and its components, and be especially wary of any and all of the following signs of a damaged chimney:


If your chimney is leaking into your home (either through the flue or along the sides of your chimney), then you have an issue that requires immediate attention. Leaks can occur for all sorts of reasons, so it’s best to have a professional take a look to assess the situation. What’s worse is that the source of a leak can be difficult to locate for the untrained eye, because leaks can move across surfaces, so you really may not know the origin. For example, if you have a leak caused by poor flashing around the base of your chimney, that leak may enter your attic, move across the rafters, and make its way into a wall that doesn’t appear to be close to the chimney. When you notice a leak, just give us a call for an inspection — we’ll find the problem and fix it before any more damage can occur.


Your chimney can be blocked by a variety of obstructions. You could have birds that have built a nest in your chimney. You could have a rodent that is stuck in your flue. Your flue could be caked with soot and creosote buildup. Your damper may be stuck shut. Or you may have snow and ice covering the hole for your chimney. Regardless of the blockage, these scenarios can prove rather hazardous, and you should never light a fire in your fireplace if you suspect that the chimney is blocked. And unfortunately, you may only notice that your chimney is blocked if the smoke isn’t escaping your home through the chimney. If you’d like to test whether or not your chimney is blocked before you light a fire, you may be able to hear air flow through the chimney (listen for a small amount of wind) — just make sure the damper is open. You can also inspect your chimney visually to check if the damper is open (use a flashlight to inspect your damper), and you may be able to see light through the entirety of your chimney during the daytime if it is unobstructed. Just be wary that if you’re inspecting your chimney and fireplace yourself that you’re liable to get some soot on you! If you do notice a blockage in your chimney flue, count on us for an inspection and cleaning.

Damaged or Missing Bricks

If the exterior of your chimney has bricks missing or damaged, then it is overdue for repairs. Chimneys are certainly built to last, yet their exposure to the elements means that they won’t last forever. Bricks will eventually deteriorate and fail, and the mortar holding your chimney’s bricks together will also lose its integrity. Your chimney is liable to be damaged from falling branches, high winds, hail, other precipitation, and changing temperatures, so it’s a good idea to inspect and maintain the brickwork of your chimney regularly. We recommend an inspection at least once per year.

Poor Mortar

As we mentioned, your mortar endures all of the elements that the bricks of your chimney endure. And, over time, the mortar will slowly chip away. Fortunately, brick chimneys can be repaired with tuckpointing, a technique where the mortar is replenished to reestablish the structural support it was intended to provide. Mortar may also be applied to the surfaces of your bricks to restore their protective functionality. We use colored mortars that match your current brick and mortar colors to perform any necessary tuckpointing.